This post may contain affiliate links for which I may earn a commission at no additional cost to you. For more information click here

Why Is My Miele Vacuum Not Turning On

In most cases, when a Miele vacuum won’t turn on, it’s due to one of three common causes. The first is that the vacuum may not be plugged in properly. Make sure the cord is firmly connected to both the wall outlet and the power switch on the back of your vacuum. If that doesn’t work, make sure there isn’t a blown fuse or circuit breaker in your home.

The second cause could be a faulty motor or belt inside your vacuum. This can happen if you’ve been using your vacuum for an extended period of time without giving it proper maintenance and care. To check this, open up your Miele vacuum’s casing and inspect the belts and motors for any signs of wear or damage.

Finally, it could simply be that your battery has run out of charge. Check to see if there are any lights lit up indicating low battery power; if so, try charging it before attempting to use it again.


If none of these solutions work for you, then you may need to take more drastic steps, such as replacing parts or contacting customer service for help with repairs—especially if you’re under warranty from Miele itself. It’s also worth noting that some models come with optional accessories like filters, which must be regularly cleared out in order to keep them working properly; failing to do so can lead to poor suction power even when turned on correctly.

  • Check connections between wall outlet & power switch.
  • Inspect interior belts & motors.
  • Check battery life & charge accordingly.

No matter what problem you might have getting your Miele to work again, taking these steps will help you figure out and fix the problem, saving you time and trouble in the long run.

Check Your Vacuum’s Power Source

The first step in troubleshooting any appliance that won’t turn on is to make sure that the power source is working properly. Start by checking the outlet or extension cord that the vacuum cleaner is plugged into; if there’s an issue with either of these, then they’ll need to be replaced before anything else can be done.

You should also check the fuse box of your home or apartment building (if applicable) and ensure all fuses are in their proper positions and not blown out. If this doesn’t solve your problem, then move onto step two.

Next, check the cord of your vacuum cleaner itself and make sure it’s plugged into the proper outlet. If it is, then take a look at all parts of the cord for any signs of damage—frayed wires can be a common problem that stops power from getting to your appliance. Additionally, inspect both ends of the plug for any dirt or debris that may have gotten stuck inside.

If you don’t find anything wrong with either the outlet or extension cord (or they’ve been replaced but still won’t work), then move onto step three: testing the on/off switch. This can often be done simply by pressing gently on each side to see if power is flowing properly through them.

Finally, if all else fails, you should consider taking your vacuum cleaner in for professional repair services. A qualified technician will be able to determine what is wrong with your machine and provide an appropriate solution, whether it is replacing faulty parts or simply cleaning it out.

By following these steps, you can make sure that everything is checked properly before you have to pay for expensive repairs!

Check The Vacuum’s Cable/Power Button

After making sure the power source is working properly, you should look at your vacuum cleaner’s cable and/or power button for any damage that you can see. In some cases, a broken cable can stop electricity from getting to the appliance, and a broken power button can keep it from turning on at all.

If either of these parts looks broken or damaged (for example, if the wires are fraying), they must be replaced before the machine can be used again. If it is used wrong, it could cause more damage.

Check all visible components of your vacuum cleaner before replacing the cable or power button. This means checking the filter and dust cup for any blockages or clogs, making sure all the hoses are securely attached, and looking for any screws that may have come loose. Also, if you hear strange sounds coming from inside the machine, this could be a sign of a bigger problem.

Lastly, you should check your vacuum’s user manual before you try to fix or replace any parts, since doing so without the right instructions can cause more damage and void the warranty. If in doubt, always contact an experienced professional who specializes in such repairs. They will be able to quickly diagnose and safely resolve the issue.

Resetting A Miele Vacuum Cleaner.

If neither of those steps fixed your issue with getting your Miele vacuum cleaner running again, try resetting it. To do so, unplug both ends of the cord from wall outlets, wait 10 seconds, plug one end back into an outlet, followed by another 10-second pause, and finally plug both ends back into their respective wall outlets. Most of the time, this simple step is all that is needed to get things back to how they should work.

When a Miele vacuum cleaner has multiple issues, resetting it can help clear out the issue with its electronic components, like the fan blower motor, suction power, and filter cleaning. If your unit is displaying error codes or not functioning properly after being serviced for maintenance, a simple reset might be all you need to get it running again.

To ensure that the reset works as intended, always follow the steps outlined above:

1. Unplug both ends of cord from wall outlets

2. Wait 10 seconds

3. Plug one end back into an outlet

  • Wait another 10 seconds
  • Plug both ends back into respective wall outlets

If done correctly, this should restore normal operation without needing any further intervention. But if the problem keeps happening, you should call customer service or have a qualified technician check your Miele vacuum.

Run An Empty Cycle On The Machine.

When debris builds up inside parts like roller brush assemblies, hose connection points, etc., it can stop the machine from starting up because stuck pieces stop it from turning or moving. Disconnect all attachments and tools from the unit, turn the setting knob to the “empty” position (on newer models), or press the dedicated “Empty Cycle” button located near the body base, and run a full cleaning session without adding additional dirt or debris inside the collection chamber while observing overall performance behavior: does the motor sound loud? Is the air flow strong enough? Are rollers spinning properly? All positive confirmations mean that the reset procedure worked and that normal functionality has been restored.

However, if you are still experiencing the same problems, it is time to inspect interior components more closely, as they may require a deeper clean or even a complete replacement. Inspect the roller brush assembly for any signs of wear and tear (cracks, missing parts, etc.) and visually search for any foreign objects that could be causing blockage; remove them with long-handled tweezers or a similar tool if necessary. Pay attention to hose connection points and ensure that there is no clogging present by running water through them before reconnecting them to the unit.

It is also possible that debris buildup inside the dust cup chamber can cause trouble during the emptying process, so take off the cover lid and inspect the contents carefully while manually cleaning out dirt and debris if needed. Make sure all filters are properly cleaned or replaced according to manufacturer instructions before replacing the lid on the unit again.
3. Disconnect all attachments/tools from unit
2. Switch setting knob over “” empty “” position

  • Press dedicated ‘Empty Cycle” button located near body base
  • Inspect roller brush assembly for any signs of wear & tear
  • Visually search for any foreign objects causing blockage

    Consulting With Local Repair Shop Or Manufacturer Service Center.

    If all else fails – reach out local repair shop servicing brand specific products like yours in order get deeper diagnosis done professionally . Same goes for manufacturer service centers offering warranty coverage options based upon original purchase date information provided by customer via paper invoice proof documents supplied beforehand.. Make sure bring along detailed description about existing issues encountered + provide technician team list necessary spare parts needed prior starting actual repairs job duties assigned as well.

    Consulting with a local repair shop or manufacturer service center is often the last resort when it comes to fixing common technical problems. Not only can they provide you with an experienced technician, but they have access to brand-specific parts that may be difficult for you to find on your own.

    When consulting with a local repair shop or manufacturer service center, make sure you bring along any documentation related to the product in question and a detailed description of what experiences issues are being encountered. This will help them better diagnose the problem and get started on repairs faster.

    If warranty options are available through the manufacturer’s service center, then customers should also take care to bring along proof of purchase via paper invoice document(s). In most cases this will allow technicians at the service center determine if coverage still applies depending upon original purchase date information provided by customer beforehand.