If your Bissell vacuum cleaner starts to smoke, this could be an indication that there is something wrong with it. Not only is it possible that there is a problem with the machine itself, but it is also possible that this indicates that the air in your home is now filled with fumes that could be harmful to your health. I will like to offer some potential solutions to the issue of smoky exhaust coming from a Bissell vacuum cleaner and will also discuss a few of the potential causes of such exhaust..
Common Causes of Smoke from a Bissell Vacuum Cleaner
The most common cause of smoke coming from your vacuum cleaner is an overheated motor. This can be caused by using the vacuum on carpets or rugs for too long, as these materials can quickly clog up the brushes and prevent air circulation. Additionally, if you have blocked off the exhaust filter then this will also contribute to an overheating problem.
Another possible cause is that one or more of your hoses has become damaged due to wear and tear over time. If this is the case, it may mean that fumes are escaping through tiny tears in these tubes which could then lead to smoke being emitted from your machine.
Finally, there might be a build-up of dirt inside the actual vacuum cleaner body which could result in heat not dissipating properly. Over time this could create enough heat for smoke to start appearing when you turn your appliance on.
Also read how long will my Bissell vacuum last
How To Fix These Problems
If you think that an overheated motor is causing smoking from your Bissell Vacuum Cleaner, then you should try cleaning out any blockages around its filters and hoses first. You should also check whether there are any items blocking off air vents so make sure they’re all clear before turning it back on again.
When it comes to potential hose damage, replacing them with new ones should solve the issue pretty easily. There’s no need to take apart the entire machine either – just unscrewing them at their connection points and swapping them out will do the job!
- Replacing worn out hoses.
- Cleaning blocked filters & vents.
As for dirt build-up inside your machine, regularly emptying its dustbin after each use will help keep everything nice and clean without having to dismantle anything else further down into its workings. Alternatively, purchasing some compressed air cans can prove useful here as well – simply spray lightly into all crevices within your device until nothing else escapes out!
- Regularly emptying dustbin.
- Using compressed air cans.
Frayed Power Cord.
One possibility for why your Bissell Vacuum Cleaner is smoking is due to a frayed power cord. A fraying power cord can cause sparks and even fires when plugged in, so if you notice any exposed wires or signs of burning around the plug then unplugging the device immediately and replacing the power cord should be done. It’s important to always use original parts recommended by manufactures such as Bissell when replacing cords – generic components are not built for these specific devices and won’t necessarily perform properly.
You can replace the cord yourself or take it to an authorized technician. If replacing it yourself, always unplug the device before starting and remember that you should never repair a power cord with electrical tape – this will not provide enough insulation if there are any exposed wires. The safest option is to replace the entire cord and plug.
When buying a new power cord, make sure you get one of suitable length – too short may be inconvenient but going for longer than necessary could also lead to fraying due to excess bending. Check what type of plugs your vacuum cleaner requires and purchase accordingly – both ends must have compatible connectors otherwise the connection won’t work!
- Always use original parts recommended by manufactures such as Bissell
- Never repair a power cord with electrical tape
- Check what type of plugs your vacuum cleaner requires before purchasing
Another potential cause of smoke coming from a Bissell Vacuum Cleaner could be due to its filter being clogged. The air flow within these machines needs to remain unrestricted at all times in order for them too run smoothly without overheating; if dust particles begin blocking up filters then they need changing regularly – usually every three months – otherwise problems like this may occur. Additionally, using inappropriate attachments (such as ones made out of plastic) while vacuuming can lead quite quickly to blocked filters too.
How to Fix It:
- Check the main filter – located inside the dust cup – for any obstructions and if found, clear them out as best as possible.
- Replace the air filter with a genuine Bissell one; you can buy these from most hardware stores or online.
- If using plastic attachments, switch back to more appropriate ones such as those made of metal.
Finally, it is always wise to thoroughly clean your vacuum cleaner every month or so in order to ensure its longevity and proper performance. This includes not only cleaning out filters but also emptying/washing out dust cups and wiping down body parts too. If smoke continues after all of this has been done then it may be time for a tune-up by an authorized technician.
Dirty Dust Bag/Canister.
If there’s visible evidence of debris inside either your dust bag or its accompanying cannister then this means that both need emptying straight away before continuing with cleaning operations – failure too do so will result in increased levels of suction which essentially means more heat buildup and therefore greater chances for smoke production. It’s best practice here again though just like with filter replacements above: make sure that only official replacement parts are used here instead of trying third-party alternatives..
How To Empty A Dust Bag/Canister
The process of dust bag/canister emptying is really quite a simple one, yet it’s still essential that the instructions are followed to ensure no harm comes to either you or your vacuum device. First and foremost though before attempting this procedure, make sure that the vacuum cleaner has been switched off and unplugged from any power sockets – just in case!
Once that’s done, then simply open up the dust canister by pressing down on the release latch until it pops outwards. Now look inside for any visible debris and remove as much as possible with your hands (or alternatively use a pair of tweezers). After all of that’s said and done then proceed to empty whatever remains inside into an appropriate trash receptacle; next rinse thoroughly both inside and outside with warm water so there is no remaining residue left behind – be sure here not to allow any moisture into electrical components or else risk damaging them irreparably.
- Switch off & unplug from power socket
- Open up canister by pressing down on latch
- Remove visible debris manually
- Empty contents into appropriate bin
- Rinse both internally & externally with warm water.
The motor inside any vacuum cleaner serves as its beating heart – keeping everything running smoothly – but unfortunately motors do have their limits regarding temperature tolerances which once exceeded tend produce large amounts smoke along with other issues like loud noises etc.. In cases where this happens it’s usually best just replace entire motor unit since repairing individual components rarely works out cost effectively over time). Always double check what type model number motor you require prior purchasing one however.
Signs of an overheating motor.
An overheating motor manifests itself in a variety of ways, the most common being:
- Smoke or burning smells
- Loud noises
- Reduced suction power
In order to prevent this from happening it is important practice good maintenance and cleaning habits. Vacuums should be regularly cleaned inside and out on regular basis, paying particular attention any built-up dust and debris around the vents/filters.
It’s also important check for obstructions inside tubing or hose as these can block airways leading the motor which then forces it work harder than designed thus resulting in higher temperatures. Obviously if vacuum is dropped onto hard surface this can cause mechanical damage too so always be mindful that accidents happen!