This post may contain affiliate links for which I may earn a commission at no additional cost to you. For more information click here

Eureka Cordless Vacuum Cleaner Not Charging? Here’s What To Do!

Are you having trouble getting your Eureka cordless vacuum cleaner to charge? Don’t worry, it’s a common problem that can be easily fixed with the right tips and tricks. In this post we’ll go through all the solutions for when the battery isn’t charging correctly, so keep reading to find out how to get your vacuum cleaning again in no time!

Check the Battery

The first thing you’ll want to do is check the battery itself. It could be that it’s not making a good connection with the charging station, or there may be something wrong with the contacts inside. To begin troubleshooting, unplug your machine and remove the battery from its compartment. Make sure all of its connections are secure, then try plugging it back in and see if it charges correctly this time.

Why Is My Eureka Vacuum Cleaner So Loud? Here’s How To Fix It

Clean Out Any Debris

It’s also possible that debris such as pet hair or dust have built up around the charging port or on other parts of your Eureka vacuum cleaner. If this is blocking any contact points then your device won’t get sufficient power to charge properly. Disconnect everything again and use a soft brush to clear away any gunk that might be preventing your charger from working correctly.

Once you’ve given everything a thorough clean make sure no wires are loose before reconnecting everything and trying again – hopefully now you should find that your machine starts charging successfully! That’s how easy it can be to fix an issue like this one..

Clean Battery Contacts

The first thing you should do when trying to fix a non-charging Eureka cordless vacuum is clean off any residue or dust from the battery contacts. This ensures that there is an unobstructed connection between the battery and charger, allowing power to flow properly. To clean away any debris, use an alcohol swab or some cotton buds dampened with rubbing alcohol. Apply gentle pressure and wipe in one direction only until all dirt has been cleared away.

Check the Battery

After cleaning away any dust and debris, it is important to check the battery for signs of damage. This can be done by inspecting the metal contacts on either side. If there are corroded spots or black residue present, then this may indicate that battery has a fault and needs to be replaced.

Test the Charger

If everything appears to be in order with both vacuum’s parts, then you should proceed to test if the charger is working properly. To do this, make sure you plug it into an electrical outlet that hasn’t been switched off recently as this could disrupt its power output. Additionally, you should use a multimeter set at 20V DC mode (or higher) while measuring across the two charging terminals in order to confirm if electricity is flowing through.

  • If no voltage reading is shown when connected directly between two pins on each terminal.
  • If voltage readings are lower than 10V but not zero.

Then your charger may have malfunctioned or become damaged and will need replacing.

Check Charger Voltage Output

You should also double check that your charger output matches what’s recommended by the manufacturer of your Eureka cordless vacuum cleaner. If it doesn’t match up then there may be issues with safely supplying enough power for charging – if this is the case then contact customer service for further advice on finding compatible chargers.

The cordless dustbuster range is a good example of how Eureka Vacuum Cleaner has taken advantage of outsourcing to bring down the cost while still providing decent quality machines. The design and power are quite basic but these units are great for quick, light clean-ups around your home such as cleaning up minor spills or picking up pet hair. They come with either an upright or hand held mode, depending on the model.

Eureka’s AS3401A EverClean Stick Vacuum Cleaner is another example of their outsourced offerings which gives you more bang for your buck. It features a powerful motor which delivers strong suction for larger messes yet it weighs only 7 pounds so it’s easy to move around when needed. Its cyclonic action technology also helps keep the filter free from clogging, making sure the machine runs optimally at all times.

For those who need something extra in terms of performance and convenience but don’t want to spend too much money, Eureka Vacuum Cleaner offers plenty of options that have been made overseas without compromising on quality too much. From lightweight cordless cleaners to budget stick vacuums – they have something that will suit almost everyone’s needs at an affordable price!

Faulty Wall Outlet

One possible cause of charging failure could be due to a faulty wall outlet not providing enough voltage needed for proper operation – try using another wall socket in order to rule out this potential issue. Also make sure that nothing else is plugged into same circuit as this could result in overloading and affect performance.